Lecture 5: Single-Energy Transient Of Ironclad Circuit
Research workbench, not a finished commentary page.
This page is generated from processed source text and candidate catalogs. It exists to help researchers decide what to verify, promote, and deeply decode next.
Source Metadata
Section titled “Source Metadata”| Field | Value |
|---|---|
| Source | Elementary Lectures on Electric Discharges, Waves and Impulses, and Other Transients |
| Year | 1911 |
| Section ID | elementary-lectures-electric-discharges-waves-impulses-lecture-05 |
| Location | lines 2972-3286 |
| Status | candidate |
| Word Count | 1306 |
| Equation Candidates In Section | 30 |
| Figure Candidates In Section | 1 |
| Quote Candidates In Section | 0 |
Opening Source Excerpt
Section titled “Opening Source Excerpt”LECTURE V. SINGLE-ENERGY TRANSIENT OF IRONCLAD CIRCUIT. 22. Usually in electric circuits, current, voltage, the magnetic field and the dielectric field are proportional to each other, and the transient thus is a simple exponential, if resulting from one form of stored energy, as discussed in the preceding lectures. This, how- ever, is no longer the case if the magnetic field contains iron or other magnetic materials, or if the dielectric field reaches densities beyond the dielectric strength of the carrier of the field, etc. ; and the proportionality between current or voltage and their respective fields, the magnetic and the dielectric, thus ceases, or, as it may be expressed, the inductance L is not constant, but varies with the current, or the capacity is not constant, but varies with the voltage. The most important caseSource-Located Theme Snippets
Section titled “Source-Located Theme Snippets”Magnetism
Section titled “Magnetism”LECTURE V. SINGLE-ENERGY TRANSIENT OF IRONCLAD CIRCUIT. 22. Usually in electric circuits, current, voltage, the magnetic field and the dielectric field are proportional to each other, and the transient thus is a simple exponential, if resulting from one form of stored energy, as discussed in the preceding lectures. This, how- ever, is no longer the case if the magnetic field contains iron or ...Transients / damping
Section titled “Transients / damping”LECTURE V. SINGLE-ENERGY TRANSIENT OF IRONCLAD CIRCUIT. 22. Usually in electric circuits, current, voltage, the magnetic field and the dielectric field are proportional to each other, and the transient thus is a simple exponential, if resulting from one form of stored energy, as discussed in the preceding l ...Waves / transmission lines
Section titled “Waves / transmission lines”... e remaining magnetizability then is (B^' — (B', and, assuming the (metallic) permeability as proportional hereto, gives and, substituting gives a, = cftco'rc^ * See "On the Law of Hysteresis," Part II, A.I.E.E. Transactions, 1892, page 621. 54 ELECTRIC DISCHARGES, WAVES AND IMPULSES. or, substituting 1_ 1 *** / t*« ,—fc / (/ • gives equation (1). For OC = 0 in equation (1), ^ = - ; for 3C = oo » = - ; that is, uv a: cr in equation (1), - = initial permeability, - = saturation value of Oi (7 magnetic density. If the magneti ...Field language
Section titled “Field language”LECTURE V. SINGLE-ENERGY TRANSIENT OF IRONCLAD CIRCUIT. 22. Usually in electric circuits, current, voltage, the magnetic field and the dielectric field are proportional to each other, and the transient thus is a simple exponential, if resulting from one form of stored energy, as discussed in the preceding lectures. This, how- ever, is no longer the case if the magnetic field contains iron or other m ...Chapter-Local Concept Hits
Section titled “Chapter-Local Concept Hits”| Concept Candidate | Hits In Section | Status |
|---|---|---|
| Magnetic permeability | 4 | seeded |
Chapter-Local Glossary Hits
Section titled “Chapter-Local Glossary Hits”| Term Candidate | Hits In Section | Status |
|---|---|---|
| No chapter-local term hits yet | - | - |
Equation Candidates
Section titled “Equation Candidates”| Candidate ID | OCR / PDF-Text Candidate | Source Location |
|---|---|---|
elementary-lectures-electric-discharges-waves-impulses-eq-candidate-0138 | SINGLE-ENERGY TRANSIENT OF IRONCLAD CIRCUIT. 53 | line 3014 |
elementary-lectures-electric-discharges-waves-impulses-eq-candidate-0139 | p = - = a + crOC; (2) | line 3033 |
elementary-lectures-electric-discharges-waves-impulses-eq-candidate-0140 | a component (B’ = (B — 3C, which is the additional flux density | line 3042 |
elementary-lectures-electric-discharges-waves-impulses-eq-candidate-0141 | density.” With increasing 3C, (B’ reaches a finite limiting value, | line 3044 |
elementary-lectures-electric-discharges-waves-impulses-eq-candidate-0142 | &x’ = 20,000 lines per cm2. * | line 3047 |
elementary-lectures-electric-discharges-waves-impulses-eq-candidate-0143 | For OC = 0 in equation (1), ^ = - ; for 3C = oo » = - ; that is, | line 3075 |
elementary-lectures-electric-discharges-waves-impulses-eq-candidate-0144 | in equation (1), - = initial permeability, - = saturation value of | line 3079 |
elementary-lectures-electric-discharges-waves-impulses-eq-candidate-0145 | iron part is given by equation (2), that of the air part is constant, | line 3086 |
Figure Candidates
Section titled “Figure Candidates”| Candidate ID | OCR / PDF-Text Candidate | Source Location |
|---|---|---|
elementary-lectures-electric-discharges-waves-impulses-fig-029 | 2 3 4 5 Fig. 29. 6 seconds | line 3221 |
Hidden-Gem Quote Candidates
Section titled “Hidden-Gem Quote Candidates”| Candidate ID | Candidate Passage | Source Location |
|---|---|---|
| No chapter-local candidates yet | - | - |
Modern Engineering Reading Prompts
Section titled “Modern Engineering Reading Prompts”- Magnetism: Track flux, reluctance, permeability, magnetizing force, and loss language against modern magnetic-circuit terminology.
- Transients / damping: Separate the temporary term from the final steady-state term and compare with differential-equation response language.
- Waves / transmission lines: Map Steinmetz’s wave and line language onto modern distributed constants, propagation velocity, standing waves, and reflections.
- Field language: Read for whether field language is mechanical, geometrical, causal, descriptive, or simply a convenient engineering model.
- Dielectricity / capacity: Check whether the passage treats capacity, condensers, displacement, or dielectric stress as field storage rather than only circuit algebra.
Ether-Field Interpretive Boundary
Section titled “Ether-Field Interpretive Boundary”- Magnetism: Centrifugal/divergent magnetic-field readings are interpretive overlays, not automatic historical claims.
- Transients / damping: Transient collapse, impulse, and surge behavior can be compared with alternative field language, but only as a clearly marked reading.
- Waves / transmission lines: Standing/traveling wave passages may support richer field interpretations; the page keeps those readings separate from verified Steinmetz wording.
- Field language: Field-pressure or field-gradient interpretations can be explored here only after the explicit source passage and modern engineering translation are kept distinct.
- Dielectricity / capacity: A Wheeler-style reading may emphasize dielectric compression, field stress, and stored potential, but this page treats that as interpretation unless Steinmetz explicitly says it.
Promotion Checklist
Section titled “Promotion Checklist”- Open the full source text and the scan or raw PDF.
- Verify the chapter boundary and surrounding context.
- Promote exact quotations only after checking the source image.
- Move mathematical candidates into canonical equation pages only after formula typography is corrected.
- Move diagram candidates into the diagram archive only after image extraction, crop verification, and manifest creation.
- Keep Steinmetz wording, modern translation, and ether-field interpretation in separate labeled layers.