Skip to content

Apparatus Subsection 74: Direct-current Commutating Machines: C. Commutating Machines

Research workbench, not a finished commentary page.

This page is generated from processed source text and candidate catalogs. It exists to help researchers decide what to verify, promote, and deeply decode next.

FieldValue
SourceTheoretical Elements of Electrical Engineering
Year1915
Section IDtheoretical-elements-electrical-engineering-section-74
Locationlines 12660-12763
Statuscandidate
Word Count288
Equation Candidates In Section0
Figure Candidates In Section0
Quote Candidates In Section0
D. C. COMMUTATING MACHINES 213 proportionally to the load, gives curves C, D, and E, which are higher at light load, but fall off faster at high load. A still further shift of brushes near the maximum current value even overturns the curve as shown in F. Curves E and F correspond to a very great shift of brushes, and an armature demagnetizing effect of the same magnitude as the field excitation, as realized in arc-light machines, in which the last part of the curve is used to secure inherent regulation for constant current. The resistance characteristic, that is, the dependence of the current and of the terminal voltage of the series generator upon 6000 6000 1 23 i 5 6 7 8 9 10 11 12 13 U 15 16 17 18 19 FIG.
... load. A still further shift of brushes near the maximum current value even overturns the curve as shown in F. Curves E and F correspond to a very great shift of brushes, and an armature demagnetizing effect of the same magnitude as the field excitation, as realized in arc-light machines, in which the last part of the curve is used to secure inherent regulation for constant current. The resistance characteristic, that is, the dependence of the current and of the terminal voltage ...
D. C. COMMUTATING MACHINES 213 proportionally to the load, gives curves C, D, and E, which are higher at light load, but fall off faster at high load. A still further shift of brushes near the maximum current value even overturns the curve as shown in F. Curves E and F correspond to a very great shift of brushes, and an armature demagnetizing e ...
... curves E and F in Fig. 116. Above a certain external resistance the series generator loses its excitation, while the shunt generator loses its excitation below a certain external resistance. Compound Generator 73. The saturation curve or magnetic characteristic A, and the load saturation curves D and G of the compound generator, are shown in Fig. 118 with the ampere-turns of the shunt field 214 ELEMENTS OF ELECTRICAL ENGINEERING as abscissas. A is the same curve as in Fi ...
Concept CandidateHits In SectionStatus
Light2seeded
Term CandidateHits In SectionStatus
No chapter-local term hits yet--
Candidate IDOCR / PDF-Text CandidateSource Location
No chapter-local candidates yet--
Candidate IDOCR / PDF-Text CandidateSource Location
No chapter-local candidates yet--
Candidate IDCandidate PassageSource Location
No chapter-local candidates yet--
  • Field language: Read for whether field language is mechanical, geometrical, causal, descriptive, or simply a convenient engineering model.
  • Radiation / light: Compare the chapter’s radiation vocabulary with modern electromagnetic radiation, spectral frequency, wavelength, absorption, and illumination engineering.
  • Magnetism: Track flux, reluctance, permeability, magnetizing force, and loss language against modern magnetic-circuit terminology.
  • Field language: Field-pressure or field-gradient interpretations can be explored here only after the explicit source passage and modern engineering translation are kept distinct.
  • Radiation / light: Radiation and wave language can invite ether-field comparison, but source wording, modern radiation theory, and speculative synthesis must stay separated.
  • Magnetism: Centrifugal/divergent magnetic-field readings are interpretive overlays, not automatic historical claims.
  1. Open the full source text and the scan or raw PDF.
  2. Verify the chapter boundary and surrounding context.
  3. Promote exact quotations only after checking the source image.
  4. Move mathematical candidates into canonical equation pages only after formula typography is corrected.
  5. Move diagram candidates into the diagram archive only after image extraction, crop verification, and manifest creation.
  6. Keep Steinmetz wording, modern translation, and ether-field interpretation in separate labeled layers.